Tire Pressure through Telematics for Prevention and Optimum Efficiency Performance on the Road
Did you know that 3 PSI units less in tire pressure equals 1% more fuel consumed and 10% more tire wear? Driving with the correct tire pressure is a priority in Fleet Management.
A vehicle with 10 PSI below the optimal level is very common, translating into 3% more fuel consumption and 45% more tire wear, a recurring situation due to the fact that the vast majority of Tire Pressure monitoring systems launch the low tire pressure alert until they detect 25% less in the gauge.
How does inadequate Tire Pressure affect Fleet Performance?
- Difficult to maneuver in curves
- Tire removal hazard in emergencies
- Decreased braking ability
- Impaired handling with a loaded vehicle
- Increased wear and useful life
Tires are among the most important expenses in the fleet, driving with the wrong tire pressure compromises safety and performance during the trip, so ensuring the optimal condition of the tires before each trip is a great challenge for the companies. motor transport companies, representing the difference between an incident on the route and a successful, punctual and above all profitable trip.
- What is the current state of tire pressure?
- What bad driving habits are wearing down your tires?
- Are we checking the tire pressure status before each trip?
- When was the last tire change?
- Do the tires guarantee an average useful life?
- When did most tire pressure abnormalities occur?
Guarantee optimal tire pressure before every trip!
Didcom has developed a real-time tire pressure monitoring system with Bluetooth low energy sensors to address this challenge and enable carriers to ensure optimum tire pressure before every trip.
Our telematics solution provides traceability of tire pressure in vehicles to the person in charge of Fleet Management, by monitoring the correct pressure of each tire, identifying those that need to be adjusted to avoid going on the road with low or high tire pressure. , that can cause risks, accidents or generate deficiencies in performance, accelerated wear and increase in the consumption of fuel and resources.
Features of our Tire Pressure Monitoring Solution
- Fully integrated with MyGeotab functionality
- Settings and configuration of rules and notifications
- Bluetooth LE (BLE) operating mode
- Up to 18 tire pressure sensors
- 100% autonomous sensors with configurable intervals to measure and record
- Up to 5 years of autonomous operation with battery
- Measurement error in the operating environment not more than 1%
- Easy connection to Geotab GO via IOX
- Quick and easy installation
Tire pressure logs are obtained via the Didcom BLEG and transmitted in real time via the GO device, which will send all the information to MyGeotab.
Telematics focused on optimal Tire Pressure in the Fleet!
Guarantee the adequate tire pressure in vehicles before each trip with our telematic pressure monitoring solution through bluetooth wireless sensors, allowing the identification of pressure anomalies and possible tire wear to correct and prevent risks, reinforcing safety and optimal performance.
- Tire pressure traceability at all times
- Detailed audit of the tire pressure status throughout the trip
- Validation of the pressure in each tire of the vehicle
- Prevention of possible incidents on the road
- Mitigation of rapid tire wear and high fuel costs
Are you interested in ensuring the optimal level of tire pressure in your vehicles? We can schedule a meeting and talk…
Últimos Blogs
Últimas Noticias
Didcom attends Geotab LATAM Partner Day
Temas de interés